concrete culvert box mold machine

concrete culvert box mold is equipment to make reinforced concrete box culvert.
use wet casting concrete to form into shape. This kind of mold has features of low cost, easy to operate and save labors.
finished products widely used in water supply, drainage, power and other kind of road culvert project.




Email: chinapipemachine@gmail.com
Mobi: +86-15192160306
Web: www.culvertpipemachine.com

underground water pipe production line, PCCP pipe making machine, wastewater applications pipe making equipment, industrial piping making plant

underground water pipe production line, PCCP pipe making machine, wastewater applications pipe making equipment, industrial piping making plant

PCCP is short for prestressed concrete cylinder pipe. consists of a concrete core, a thin steel cylinder, high tensile prestressing wires and a mortar coating. The concrete core is the main structural load-bearing component with the steel cylinder acting as a water barrier between concrete layers, the prestressing wires produce a uniform compressive pressure in the core that offset tensile stresses in the pipe, and the mortar coating protects the prestressing wires from physical damage and external corrosion.

PCCP is widely used in municipal water and wastewater applications, agricultural irrigation,inverted siphon,as well as industrial piping.

Features of PCCP:
PCCP is custom-designed and made for every application. Each section of pipe, along with each fitting, can be made to meet the pressure loadings and special configuration required.
PCCP is installed in less time on site. Because it is a rigid conduit, PCCP needs no special bedding or backfilling under normal ground conditions. Installing flexible pipe such as fiberglass, steel, or ductile iron often requires bracing, high-bedding compaction or welding—each adds cost, time and potential problems.
PCCP provides built-in corrosion protection. Due to its unique design combining a steel cylinder encased in concrete, PCCP is chemically protected from corrosion.
PCCP has the high strength to withstand internal and external pressure loads. The pipe’s concrete and steel wall is prestressed with steel wire to provide more than sufficient strength to withstand the water pressure. The rigid wall fully supports the external forces of the surrounding earth.
PCCP includes a complete range of standard and custom fittings (Please see fittings section).
PCCP is available in all standard diameters from 16 to 144 inches. Straight sections of PCCP are made in lengths of either 16 or 24 feet and in virtually any pipe diameters your application requires. And we can provide matching fittings in all standard diameters, too.
PCCP is the only piping material that is designed for the combination of internal pressure and external loads. PCCP is designed in accordance with AWWA C-304 design standard.

We can supply equipments for the whole PCCP pipe production line such as:
Water Transmission Lines
Water Mains
Wastewater Gravity Sewers
Wastewater Mains
Dam Principal Spillways
Water Treatment Plants – Process Lines
Wastewater Treatment Plants – Process Lines
Industrial Process Lines
Chilled Water Lines
Power Plant Cooling and Make-up Water Lines
Subaqueous Intake and Outfall Lines
Pile Supported Lines
Carrier Pipe in Tunnel Casings

For more information:www.concretepipemachines.com
         Email: pony@concretepipemachines.com
         Mobi:+86-15192160306(whatsapp/ viber/ wechat are available)

Pre-stressed Concrete Cylinder Pipe (PCCP) Equipment

Pre-stressed Concrete Cylinder Pipe (PCCP) Equipment is used to produce PCCP pipes.

Concrete pressure pipe are long lasting due to their resilience, strength and corrosion resistance. Concrete pressure pipes are selfsupporting structures and can therefore be installed in accordance with the standard

installation practices used for reinforced concrete pipes. The use of concrete pressure pipes promotes regional value creation due to the use of locally available materials and the creation of employment opportunities in pipe manufacturing.

Email: pony@concretepipemachines.com

Mobi:+86-15192160306

Web:www.concretepipesmachine.com

Products

• Carrier Pipe in Tunnel Casings
• Water Transmission Lines
• Water Mains
• Wastewater Gravity Sewers
• Wastewater Mains
• Dam Principal Spillways
• Water Treatment Plants – Process Lines
• Wastewater Treatment Plants – Process Lines
• Industrial Process Lines
• Chilled Water Lines
• Power Plant Cooling and Make-up Water Lines
• Subaqueous Intake and Outfall Lines
• Pile Supported Lines
• Plant concept PCCP production 
• The plant can be designed for the manufacture of lined and embedded steel cylinder concrete pressure pipes. Pressure pipes with a nominal diameter of up to and including 1500 mm/60 inches are frequently lined steel cylinder concrete pipes. Pressure pipes with nominal diameters above 1500 mm/60 inches are embedded steel cylinder concrete pressure pipes.
  For the production of pressure pipes the following equipment is being required:

Plant concept PCCP production 

The plant can be designed for the manufacture of lined and embedded steel cylinder concrete pressure pipes. Pressure pipes with a nominal diameter of up to and including 1500 mm/60 inches are frequently lined steel cylinder concrete pipes. Pressure pipes with nominal diameters above 1500 mm/60 inches are embedded steel cylinder concrete pressure pipes.

For the production of pressure pipes the following equipment is being required:

• 
• End-ring shap machinery
• Automatic helicoidal welding machine for steel cylinder production
• 
• 
  
• Machines for welding end-rings 
• 

hydrostatic testing of the steel cylinders

 

Machines and mould equipment for lining and embedding of the steel cylinders

Wire Spinning Machine

PCCP pipe motor sparying machine

Steam Pool for PCCP Pipe

Finished Products

Performance profile PCCP production 

The production of concrete pressure pipes requires extensive know-how and well engineered production technology for the entire pipe manufacturing process, but in particular in the two main areas of steel processing and concrete technologies.

Dependent on pressure classes and the nominal diameter of the required pipe, concrete pressure pipes can be manufactured as lined cylinder pipes (LCP) or as embedded cylinder pipes (ECP) with an adapted steel wall thickness for the cylinder and adapted steel wire qualities (wire thickness, gradient, multiple winding). The design of concrete pressure pipe takes advantage of the best properties of both the concrete and the steel.

Steel cylinder production is suited for processing sheet metal with a thickness from 1,5mm to 6,5 mm. Planning is important but execution is critical. Equipment and systems must perform in accordance with functional requirements and detailed design specifications.

Our Services:

• Planning PCCP production plants
• Product Design and Development
• Facility Commissioning
• Personnel Training
• Equipment Procurement
• Manufacturing Processes
• Marketing
• Documentation PCCP production plants

Contact: 

Tel: +86-15192160306

concrete pipe making machine sold to South Africa

concrete pipe making machine sold to South Africa is one of the most widely process to make concrete pipes. Spun concrete pipe machine made by our company could make pipes diameter from 250 mm to 2500 mm,
length up to 5 meters. joint type could be male & female; bell & socket; flat end; steel socket joint.

The whole plant include batching machine; concrete mixer; concrete pipe machine; concrete pipe mold; concrete feeding machine.
When start the machine, use feeding machine to feed concrete into the mold, the mold will be driven by the roller. Both roller and mold rotating in high speed. centrifugal force produced by roller could make concrete adhere onto the inner wall of mold. As feeding more concrete into the mold, the concrete will be shaped into pipe with high pressure.

Web:www.concretepipemachines.com
Email:pony@concretepipemachines.com
Mobi:+86-15192160306(whatsapp/ viber/ wechat are available)

concrete pipe machine sold to India

concrete pipe machine sold to India is one of the most widely process to make concrete pipes. Spun concrete pipe machine made by our company could make pipes diameter from 250 mm to 2500 mm,
length up to 5 meters. joint type could be male & female; bell & socket; flat end; steel socket joint.

The whole plant include batching machine; concrete mixer; concrete pipe machine; concrete pipe mold; concrete feeding machine.
When start the machine, use feeding machine to feed concrete into the mold, the mold will be driven by the roller. Both roller and mold rotating in high speed. centrifugal force produced by roller could make concrete adhere onto the inner wall of mold. As feeding more concrete into the mold, the concrete will be shaped into pipe with high pressure.
Web:www.concretepipemachines.com
Email:pony@concretepipemachines.com
Mobi:+86-15192160306(whatsapp/ viber/ wechat are available)

concrete pipe machine sold to India (vertical type) could make pipes with socket joint; male & female joint; flat joint; bell & spigot joint; and also F shape joint. Pipes diameter from 600 mm to 3600 mm, length up to 3 meters. customization for special specification and requirement is available.
vibrated concrete pipe machine is the most advanced and popular pipe machine in the world, our company import the technology of western countries, and devote ourselves to provide the best solution of the Concrete pipe machine for the customers from the world. It can produce concrete pipe with large diameter.
Main machine installed underground, it's type of vertical making process. The steel pipe mold is a closed-construction made from inner mold, outer mold. The vibration energy for making pipes is produced by core vibrator, core vibrator fixed on to the inner mold by hydraulic system, from this new design, we can change the outer mold quickly. Vibration force is an high and non-directional energy, this makes concrete could flow freely in the mold.

Web:www.concretepipemachines.com
Email:pony@concretepipemachines.com
Mobi:+86-15192160306 (whatsapp/ viber/ wechat are available)

concrete pipe machine Turkey Technology

concrete pipe machine with Turkey Technology could make pipes with socket joint; male & female joint; flat joint; bell & spigot joint; and also F shape joint. Pipes diameter from 600 mm to 3600 mm, length up to 3 meters. customization for special specification and requirement is available.
vibrated concrete pipe machine is the most advanced and popular pipe machine in the world, our company import the technology of western countries, and devote ourselves to provide the best solution of the Concrete pipe machine for the customers from the world. It can produce concrete pipe with large diameter.
Main machine installed underground, it's type of vertical making process. The steel pipe mold is a closed-construction made from inner mold, outer mold. The vibration energy for making pipes is produced by core vibrator, core vibrator fixed on to the inner mold by hydraulic system, from this new design, we can change the outer mold quickly. Vibration force is an high and non-directional energy, this makes concrete could flow freely in the mold.

Web:www.concretepipemachines.com
Email:pony@concretepipemachines.com
Mobi:+86-15192160306 (whatsapp/ viber/ wechat are available)

concrete pole making equipment

The centrifugal machine is main equipment producing circumferential concrete products of various diameters and lengths with centrifugal molding

method. The centrifuge machine consists of riding wheel, bearing pedestal and so on, falling into three types; equipped with speed-regulating moto

r and controlling equipment, running steadily, the speed regulating range is wide, noise is low, the sealing degree of bearing is good. The whole machine

groups are operated easily and safely; the base should be box-typed and welded with high-quality structural steel then planed as a whole. They are durable

and easy to install.

The centrifugal spinning machine is necessary equipment manufacturing reinforced concrete pole. After the pole mold is installed with certain quantity

of reinforcing skeleton and concrete, the centrifugal spinning machine will drive the pole mold revolving from slow to fast. The concrete will adsorb tightly

on the inner wall of steel mould after a certain time of bond with reinforcing bars under the centrifuge force. After sealed and cured, the concrete poles are formed.

The centrifugal spinning machine for poles mainly consists of riding wheel, driving shaft, driven shaft, bearing pedestal, belt pulley, base, electromagnetic

speed-regulating motor.

Web:www.concretepipemachines.com

Email:pony@concretepipemachines.com

Mobi:+86-15192160306 (whatsapp/ viber/ wechat are available)